Blog

A single high-density AI rack can reject more heat than several traditional server racks combined. Air cooling still has a role in the room, but when GPU and HPC loads push rack densities into the tens or hundreds of kilowatts, moving that heat with air alone becomes expensive, noisy, and difficult to control. So, how does an AI HPC closed loop cooling system work? It transfers heat directly from processors into a sealed liquid circuit, then rejects that heat through a separate facility cooling …

A fog hashing immersion & hydro-cooling distributor should do more than move cooling equipment. For a high-density crypto mining or data center operation, the real requirement is a coordinated heat-rejection plan: how heat leaves the ASICs, where it goes after the tank or cold plate loop, and how the building handles that heat reliably during peak ambient conditions. Mining operators often solve the first part of the problem by deploying immersion tanks or hydro-cooling loops, then discover …

A data center can have enough cooling capacity on paper and still overheat at the rack. That is The truth about Data Center Cooling: nameplate tons, fan CFM, and thermostat setpoints do not guarantee that heat is being removed where servers actually produce it. Uptime depends on a coordinated heat-rejection path from chip to room, room to exhaust, and exhaust to the outdoors or mechanical cooling plant. For crypto mining operations, high-density compute rooms, and containerized deployments, …

A 30 kW rack once signaled an unusually demanding data center load. For high-density AI, HPC, and cryptocurrency mining operations, that number can now be a starting point. The future of immersion cooling is being driven by this simple engineering reality: air cannot economically carry away unlimited heat, especially where equipment must run continuously at high utilization. Immersion systems place servers, ASIC miners, or other electronics into a dielectric fluid that does not conduct …

A 20,000 CFM exhaust system cannot perform as designed if the building only has 8,000 CFM of usable replacement air. The result is negative building pressure, hard-to-open doors, reduced exhaust capture, cold drafts, equipment backdrafting, and higher energy use. Knowing how to choose make up air means looking beyond fan CFM and designing the air path, heating method, filtration, controls, and pressure relationship as one system. For warehouses, manufacturing plants, commercial kitchen …